When you notice drafts in the window, you must tape them as soon as possible. However, it may not be an ideal solution. It may not be able to solve the issue effectively. Therefore, it becomes important to reseal the panes. Most window seals have a lifespan of 10 to 20 years. It is quite natural to encounter issues with the windows after they pass the ten-year mark. On occasion, it is better to call experts for UPVC window repairs in Crawley. If the seal breaks down completely, follow the steps below to resolve the issue.
Steps to Reseal the UPVC Window Frames
Remove the Old Sealant Using the Right Tools
Following a quality sealing job, it is possible to get a space that is comfortable and energy-efficient. A utility knife may be able to cut off the old caulk. It usually stays placed around the window frames.
Clean the Window Frame
Experts often use mineral spirits or silicone removers to remove the remaining sealant residue around the frame. To wipe the frame, it is better to utilise a damp cloth. It may help to remove dirt and debris effectively. When the location becomes dry, it is important to clean the area again with rubbing alcohol. It may help in degreasing the area. If the location is clean, it may adhere to the sealant more effectively.
Put Sealant in Place
Following the clean-up of the location, experts may apply the new window sill seal. In most cases, polyurethane or silicone sealant is used. Loading the sealant within the caulk, experts apply it to the window frame edge. Smooth and consistent movement is necessary to get the desired result with the sealant. Keeping the bead ¼ inch, the use of a caulk tool or a damp motion can help achieve a smooth seal. However, it needs to be pushed firmly towards the frame.
Keep the Corner Sealed
While sealing the window corners, you may need to pay extra attention. It is especially important to give importance to the location where the sealant meets. It is better to apply the sealant on one side. Later on, experts may utilise caulk tools. When you need to push the solution, experts may use their fingers. It may be necessary to use the same strategy on the adjacent side. It allows for an airtight seal. To wipe away the excess sealant, a damp rag is the best option.
Review Work
After completing the sealing process, experts always recheck the window frames to ensure they are properly sealed. It enables us to identify any remaining gaps in the location. Knives are often a better option for resealing a location. For the best possible results, it is always better to use a damp rag in the end. You may be able to get a sealed and clean window. Proper sealing ensures lower energy bills and a comfortable environment.
Maplecraft Windows reseals the windows in the best possible way. Our experts offer high-quality UPVC window repairs in Crawley to address issues related to drafts. Talk to us today!